Update CompTIA Network+ N10-006 Dumps with VCE and PDF for Free (Question 1481 – Question 1500)

PassLeader released the NEWEST CompTIA N10-006 exam dumps recently! Both N10-006 VCE dumps and N10-006 PDF dumps are available on PassLeader, either N10-006 VCE dumps or N10-006 PDF dumps have the NEWEST N10-006 exam questions in it, they will help you passing CompTIA N10-006 exam easily! You can download the valid N10-006 dumps VCE and PDF from PassLeader here: https://www.passleader.com/n10-006.html (1521 Q&As Dumps –> 1643 Q&As Dumps)

Also, previewing the NEWEST PassLeader N10-006 dumps online for free on Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpSDB2amRraUV5OVk

QUESTION 1481
When a criminal or government investigation is underway, which of the following describes the identification, recovery or exchange of electronic information relevant to that investigation?

A.    Data transport
B.    First responder
C.    eDiscovery
D.    Encryption

Answer: C
Explanation:
http://searchfinancialsecurity.techtarget.com/definition/electronic-discovery

QUESTION 1482
A network architect is designing a highly redundant network with a distance vector routing protocol in order to prevent routing loops, the architect has configured the routers to advertise failed routes with the addition of an infinite metric. Which of the following methods has the architect chosen?

A.    Spanning tree
B.    Split horizon
C.    Route poisoning
D.    Hold down timers

Answer: C

QUESTION 1483
A network engineer is designing a campus-wide wireless network. Wireless access points will be distributed across the campus for maximum availability. The network is to be designed to handle a large number of roaming wireless devices. Which of the following features should the engineer use in order to dynamically limit the number of devices in each broadcast domain?

A.    VLAN pooling
B.    Subnetting
C.    WPA2
D.    LWAPP

Answer: D
Explanation:
https://en.wikipedia.org/wiki/Lightweight_Access_Point_Protocol

QUESTION 1484
A company is setting up a brand new datacenter and would like to keep the cabling infrastructure out of sight but still accessible to the network administrators. Infrastructure cost is not an issue. Which of the following should be installed to meet the requirements?

A.    Conduit
B.    Cable trays
C.    Patch panels
D.    Raised floor

Answer: C

QUESTION 1485
A technician troubleshooting an area that is having difficulty connecting to a WAP. After identifying the symptoms, which of the following should the technician do NEXT?

A.    Document findings.
B.    Resolve the issue.
C.    Establish the probable cause.
D.    Implement a solution.

Answer: C
Explanation:
http://www.examcollection.com/certification-training/network-plus-network-troubleshooting-methodology.html

QUESTION 1486
A network engineer is designing a wireless network that uses multiple access point for complete coverage. Which of the following channel selections would result in the LEAST amount of interference between each access point?

A.    Adjacent access points should be assigned channels 1, 6, and 11 with a 20MHz channel width.
B.    Adjacent access points should be assigned channels 2,6, and 10 with a 20MHz channel width.
C.    Adjacent access points should be assigned channels 7 and 11 with a 40MHz channel width.
D.    Adjacent access points should be assigned channels 8 and 11 with a 40MHz channel width.

Answer: A
Explanation:
http://www.windowsnetworking.com/articles-tutorials/wireless-networking/tips-assigning-wi-fi-channels.html

QUESTION 1487
A network technician is troubleshooting connectivity problems between switches but suspects the ports are not properly labeled. Which of the following options will help to quickly identify the switches connected to each port?

A.    Configure TACACs+ on each network device.
B.    Enable a discovery protocol on the network devices.
C.    Configure each uplink to send LACP discovery units.
D.    Enable a packet sniffer on each network device’s uplink port.

Answer: B
Explanation:
“Neighbor discovery protocols are essential for network administrators and management tools to accurately construct a view of the network topology. Each manufacturer has its own supported mix of neighbor discovery protocols, loosely based on how standards-focused that vendor is and how much it wants to pay in royalties to use proprietary protocols. The two most widely used are LLDP (Link Layer Discovery Protocol), an IEEE standard, and CDP (Cisco Discovery Protocol).”
http://www.networkcomputing.com/networking/5-basic-switch-settings-you-must-know/879127198

QUESTION 1488
The BEST way to secure the most vulnerable attack vector for a network is to ____.

A.    Update all antivirus definitions on workstations and servers.
B.    Use biometrics and SSO for authentication.
C.    Remove unneeded services running on the servers.
D.    Provide end-user awareness training to office staff.

Answer: A

QUESTION 1489
Which of the following encryption types would MOST likely be used for securing a client-to-server VPN connection?

A.    TKIP
B.    Kerberos
C.    ISAKMP
D.    AES

Answer: D

QUESTION 1490
Host1’s application generates a payload of 2500B of data and sends to Host2. When the application on Host2 receives the payload it will be ____.

A.    more than 2500B due to encapsulation
B.    2500B in size
C.    less than 2500B due to decapsulation
D.    1500B due to the default MTU settings

Answer: B
Explanation:
http://techterms.com/definition/payload

QUESTION 1491
A technician is troubleshooting a desktop connectivity issue. The technician believes a static ARP may be causing the problem. Which of the following should the technician do NEXT according to the network troubleshooting methodology?

A.    Remove the ARP entry the user’s desktop.
B.    Identify a suitable time to resolve the issue on the affected desktop.
C.    Duplicate the issue in a lab by removing the ARP entry.
D.    Document the findings and provide a plan of action.

Answer: C
Explanation:
http://www.examcollection.com/certification-training/network-plus-network-troubleshooting-methodology.html

QUESTION 1492
An administrator notices an abnormally high level of network traffic from a server. Upon logging into the server, the administrator runs the following command:

Which of the following should the administrator use to correlate the active connection with the running service?

A.    netstat -p
B.    Open task manager
C.    route print
D.    Open services.mac

Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/cc958877.aspx

QUESTION 1493
A network engineer has been tasked with designing a network for a new branch office with approximately 50 network devices. This branch office will connect to the other offices via a MAN. Many of the other branch offices use off-the-shelf SOHO equipment. It is a requirement that the routing protocol chosen use the least amount of overhead. Additionally, all computers on the network will be part of a single VLAN. The connection between these computers should produce the highest throughput possible, in the most cost effective manner. Which of the following devices would be MOST appropriate?

A.    A router should be used as a gateway device, with RIPv2 as the routing protocol.
The computers should be connected to one another with 1Gb Layer 2 switch.
B.    A UTM should be used as a gateway device, with BGP as the routing protocol.
The computers should be connected to one another using 1Gb Fibre Channel.
C.    A router should be used as a gateway device, with EIGRP as the routing protocol.
The computers should be connected to one another using a single 802.11N MIMO access point.
D.    A router should be used as a gateway device, with OSPF as the routing protocol.
The computers should be connected to one another using 1Gb Layer 3 switch.

Answer: A
Explanation:
A: 1Gb Layer 2 switch is the cheapest switching solution offering 1 Gbps network connectivity between the computers. RIPv2 has a lower overhead as required in the question.
Incorrect:
Not B: A 1Gb Fibre Channel network is expensive and is no faster than a 1 Gbps network switch. Furthermore, the computers would require Fibre Channel network adapters that do not come as standard on off-the-shelf computers.
Not C: An 802.11N MIMO access point is a wireless access point. These typically run at 300 mbps which is slower than a 1 Gbps network switch. Furthermore, the computers would require MIMO network adapters that do not come as standard on off-the-shelf computers.
Not D: A layer 3 switch is more expensive than a layer 2 switch. The question states that all the computers are in the same VLAN. Therefore, there is no need for inter-VLAN routing so a layer 3 switch is not required. OSPF also has a higher overhead than RIPv2.

QUESTION 1494
A network technician is responsible for the basic security of the network. Management has asked if there is a way to improve the level of access users have to the company file server. Right now, any employee can upload and download files with basic system credentials. Which of the following would require additional credentials?

A.    Kerberos authentication
B.    MDS authentication
C.    Multifactor authentication
D.    Single sign-on authentication

Answer: C

QUESTION 1495
A network technician replaced a faulty Ethernet cable. The technician replaced one side of the patch in the incorrect part of the patch panel. Within a few minutes, the technician was informed that users were experiencing slow or no Internet connectivity all over the building. A broadcast storm began. After removing the replacement cable, which of the following should the technician do NEXT?

A.    Replace the cable during the next maintenance window.
B.    Review labeling and logical network diagram documentation.
C.    Attempt to isolate the storm to the domain by rebooting the switch.
D.    Re-terminate all of the other Ethernet cables on the switch to isolate the issue.

Answer: B

QUESTION 1496
In a network that requires multilayer switches to use authentication via RADIUS/TACACS+, which of the following access control models will the switches need to utilize?

A.    802.1q
B.    802.3af
C.    PKI
D.    802.1x

Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/ht_8021x.html#wp1258507

QUESTION 1497
A network administrator is comparing several different wireless technologies. To calculate the effective maximum file transfer rate instead of the theoretical, which of the following should be measured?

A.    Throughput
B.    Latency
C.    Goodput
D.    Bandwidth

Answer: A
Explanation:
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Wireless_Throughput_Calculations_and_Limitations

QUESTION 1498
An organization is required to implement a wireless network. The organization must implement wireless routers compatible with 802.11ac protocol that have maximum possible range. Which of the following wireless router frequencies is a viable option?

A.    2.4GHz
B.    3.7GHz
C.    5.0GHz
D.    6.0GHz

Answer: A

QUESTION 1499
A firewall technician has received calls stating the network is running slowly. The technician has found the firewall is functioning properly. Which of the following should the technician review to determine the cause of the slow performance?

A.    SNMP traps
B.    Heat maps
C.    Top talkers
D.    Port scanner

Answer: C

QUESTION 1500
A network’s design includes gateways connecting an assembly-line network. The assembly-line network users specialized cabling and interfaces to allow the assembly-line robots to communicate with one another. The IP is connecting the technician workstations with which of the following network types?

A.    CSU/DSU
B.    SCADA/ICS
C.    IS-IS
D.    LAN

Answer: B
Explanation:
https://en.wikipedia.org/wiki/SCADA


Welcome to choose PassLeader N10-006 dumps for 100% passing CompTIA N10-006 exam: https://www.passleader.com/n10-006.html (1521 Q&As VCE Dumps and PDF Dumps –> 1643 Q&As VCE Dumps and PDF Dumps)

Also, previewing the NEWEST PassLeader N10-006 dumps online for free on Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpSDB2amRraUV5OVk