Free PassLeader N10-006 Exam Dumps with VCE and PDF Download (Question 1401 – Question 1420)

PassLeader released the NEWEST CompTIA N10-006 exam dumps recently! Both N10-006 VCE dumps and N10-006 PDF dumps are available on PassLeader, either N10-006 VCE dumps or N10-006 PDF dumps have the NEWEST N10-006 exam questions in it, they will help you passing CompTIA N10-006 exam easily! You can download the valid N10-006 dumps VCE and PDF from PassLeader here: https://www.passleader.com/n10-006.html (1521 Q&As Dumps –> 1643 Q&As Dumps)

Also, previewing the NEWEST PassLeader N10-006 dumps online for free on Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpSDB2amRraUV5OVk

QUESTION 1401
Which of the following describes a design where traffic is shared between multiple network servers to provide greater throughput and reliability?

A.    Load balancing
B.    MPLS trunking
C.    VLAN tagging
D.    Multiplexing

Answer: A

QUESTION 1402
A network technician at a warehouse must implement a solution that will allow a company to track shipments as they enter and leave the facility. Additionally, warehouse workers must be able to scan and concurrently upload large images of items to a central server. Which of the following technologies is BEST suited in this facility? (Select TWO.)

A.    802.11ac
B.    P2P
C.    Bluetooth
D.    IR
E.    RFID
F.    NFC

Answer: AE

QUESTION 1403
An administrator needs to open the default port on the firewall for DNS. Which of the following is the correct port number the administrator needs to open?

A.    53
B.    67
C.    110
D.    3389

Answer: A

QUESTION 1404
A technician wants to configure a wireless network to identify itself to visitors by including the word “Guest” in the name. Which of the following would allow users to identify a wireless network by name?

A.    ESSID broadcast
B.    ARP broadcast
C.    BSSID broadcast
D.    DHCP broadcast

Answer: A

QUESTION 1405
Which of the following describes what occurs with the ID of a specified native VLAN when traffic passes over a trunk?

A.    It becomes the gateway of last resort for the switch or router.
B.    It becomes the default VLAN for the untagged frames.
C.    It becomes the priority ID for all the VLAN traffic across the device.
D.    It becomes the default gateway for the port or ports.

Answer: B

QUESTION 1406
A user has a network device that streams media to the LAN. The device is visible on the network. All PCs on the LAN can ping the device. All firewalls are turned off. The streaming device appears to function properly, but the media will not stream as requested. Which of the following TCP/IP technologies is not implemented properly?

A.    Multicast
B.    Broadcasts
C.    Unicast
D.    Anycast

Answer: A

QUESTION 1407
When a switch has multiple paths to reach the root bridge, into which of the following states is the port with the LEAST desirable path placed by the spanning tree protocol?

A.    Forwarding
B.    Bonding
C.    Blocking
D.    Listening

Answer: C

QUESTION 1408
A CSU/DSU device will connect which of the following?

A.    A T1 line to a network router
B.    An analog line to a network router
C.    A cable modern to a wireless router
D.    A local network to a VPN

Answer: A

QUESTION 1409
An administrator’s router with multiple interfaces uses OSPF. When looking at the router’s status, it is discovered that one interface is not passing traffic. Given the information below, which of the following would resolve this issue?
Output:
Fast Ethernet 0 is up, line protocol is down
Int ip address is 10.20.130.5/25
MTU 1500 bytes, BW10000 kbit, DLY 100 usec
Reliability 255/255, Tx load 1/255, Rx load 1/255
Encapsulation ospf, loopback not set
Keep alive 10
Full duplex, 100Mb/s, 100 Base Tx/Fx
Received 1052993 broadcasts
0 input errors
0 packets output, 0 bytes
0 output errors, 0 collisions, 0 resets

A.    Set the loopback address
B.    Enable the connecting port
C.    Put the IP address in the right broadcast domain
D.    Replace the line card
E.    Set OSPF to area 0

Answer: B

QUESTION 1410
Which of the following would need to be configured to allow jumbo frames on a network?

A.    MTU
B.    NAC
C.    MIBS
D.    MAC

Answer: A

QUESTION 1411
Which of the following infrastructure implementations is used to connect various circuits between remote locations?

A.    WAN
B.    PAN
C.    WLAN
D.    LAN

Answer: A

QUESTION 1412
Which of the following Ethernet features will allow increased FCoE network throughput as long as all network devices recognize its specific size?

A.    Frame relay
B.    TCP offloading
C.    Jumbo frame
D.    Quality of service
E.    Equal cost multipath

Answer: C

QUESTION 1413
A network administrator is configuring one distribution and five access switches, which will be installed in a new building. Which of the following is the BEST physical location for the equipment?

A.    The distribution switch in the IDF and the access switches in the MDF
B.    The distribution switch in the MDF and the access switches in the IDF
C.    All switches should be placed in the IDF to leave room in the MDF for servers
D.    All switches should be placed in the MDF to leave room in the IDF for servers

Answer: B

QUESTION 1414
A network technician needs to identify active services that should be disabled on the network. Which of the following tools would BEST accomplish this?

A.    Packet analyzer
B.    Content filter
C.    Interface monitoring tool
D.    Port scanner

Answer: D

QUESTION 1415
A technician needs to add new features to existing hardware devices. Which of the following should be performed to add the new features?

A.    Firmware updates
B.    Changing to IPv6
C.    Cloning
D.    Vulnerability patching

Answer: A

QUESTION 1416
Which of the following should a technician upgrade to if the existing wireless standard only allows for three non-overlapping channels and more non-overlapping channels are needed?

A.    802.11b
B.    802.11g
C.    802.11n
D.    802.1q

Answer: C

QUESTION 1417
Which of the following devices actively defends the network by detecting threats and shutting down ports or changing configurations to prevent attacks?

A.    Honeypot
B.    IPS
C.    Firewall
D.    IDS

Answer: B

QUESTION 1418
A network technician has installed and configured a new wireless router. The clients and hosts can ping each other. The WAN is a 10Gbp/s cable connection. The wired clients have fast connections. The wireless clients are slow to ping and browse the Internet. Which of the following could be the cause of the slow wireless clients?

A.    An access point experiencing RFI from florescent light bulbs
B.    A router is on the incorrect LAN
C.    A cable connection does not support wireless
D.    A high signal-to-noise ratio on the wireless network

Answer: A

QUESTION 1419
Given the following requirements:
– Notify administrators of Advanced Packaging Tools (APTs)
– Allow network access forclients in the lobby with a password key
Which of the following should be implemented to satisfy these conditions? (Select TWO.)

A.    UTM
B.    WPA2
C.    IPSec
D.    Firewall
E.    POP3
F.    RADIUS

Answer: AB

QUESTION 1420
During a business trip a user connects to the hotel’s wireless to send emails to customers. The user notices the next day that emails have been sent from the user’s account without consent. Which of the following protocols was used to compromise the user’s email password utilizing a network sniffer?

A.    SSL
B.    HTTP
C.    TFTP
D.    DNS

Answer: B


Welcome to choose PassLeader N10-006 dumps for 100% passing CompTIA N10-006 exam: https://www.passleader.com/n10-006.html (1521 Q&As VCE Dumps and PDF Dumps –> 1643 Q&As VCE Dumps and PDF Dumps)

Also, previewing the NEWEST PassLeader N10-006 dumps online for free on Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpSDB2amRraUV5OVk